Dead time
Description
Delay the input signal by user-defined delays.
Important
The input signal must be boolean (0 or 1) to be properly processed by this dead time block.
Important
If the minimum time step of the solver is larger than the falling or rising time, the delay value that will be considered will be equal to the minimum time step.
Library
Control > Discrete
Parameters
| Property | Display Name | Parameter Type | Description |
|---|---|---|---|
| RisingEdgeDelay | Rising Edge Delay [s] | DoubleParameter | Rising Edge Delay |
| FallingEdgeDelay | Falling Edge Delay [s] | DoubleParameter | Falling Edge Delay |
| SamplingTime | Sampling Time [s] | DoubleParameter | Sampling Time |
Pins
| Property | Pin Name | Type | Description |
|---|---|---|---|
| In | In | ControlIn | Input |
| Out | Out | ControlOut | Output |
Default Size
| Width | Height |
|---|---|
| 4 | 4 |